This is an update to my OG TRANSBRAKE MOD

PLEASE REMOVE THE OLD ONE IF YOU WANT TO USE THIS ONE

THIS WILL NOT WORK IN CONJUNCTION WITH MY 3 STEP SYSTEM use one or the other.

This mod adds four new key binds in the settings related to the Trans Brake, giving you more control and realism when launching drag cars.

New Trans Brake Key Binds​

• 
  Trans Brake (Hold) – Changes the trans brake to a more realistic setup where the button must be held down to keep the trans brake engaged, instead of using a toggle.
• Trans Brake (Bump) – Works like a real-life bump button, allowing the car to creep forward while the trans brake is being held.
• Trans Brake (Bump +) – Increases the bump release time, allowing the car to move slightly farther with each bump.
• Trans Brake (Bump −) – Decreases the bump release time, allowing for finer, more precise staging adjustments.

The bump time controls how long the trans brake releases when the bump button is pressed. A longer bump time results in more movement, while a shorter bump time results in smaller, more controlled bumps.

You can find all of these key binds by going to Options → Controls → Vehicle, then scrolling down to the Trans Brake section.

Two-Step Logic Changes​

This mod also updates the Two-Step logic to be more flexible and easier to use. Previously, the Two-Step only activated when the foot brake was pressed almost all the way down, which could be limiting in certain situations.

Now, the Two-Step will activate when any of the following are engaged:

• Foot brake
• Trans brake
• Handbrake
• Clutch

Any of these inputs will now trigger the Two-Step, allowing for more launch combinations and better control for different drag racing setups.

This updated fixes an issues i unintentionally added with the first hot fix where automatic cars in particular would have a delay upon leaving the line.

Sorry for any issues and thank ya'll for the feedback.

I was made aware of an issue where when used with a manual transmission car the Two-Step would remain enabled until the throttle was fully released.

I changed the logic responsible for disabling the Two-Step once you start moving it works as intended now.

Sorry for any issue glad i was able to catch this quickly.